About Me

My photo
I'm a married mum who loves chocolate & music & having an opinion on just about everything! E-Mail summermama@hotmail.co.uk
Showing posts with label Maxi Cosi. Show all posts
Showing posts with label Maxi Cosi. Show all posts

Wednesday, March 28, 2012

Maxi Cosi Opal Goes Forward Facing!


When The Boy was nine months old he became too tall to safely continue using the Maxi Cosi CabrioFix carseat. They recommend the harness is no more than an inch below the height of the shoulders, and after a growth spurt one day it was definitely more than an inch for The Boy. I was faced with a dilemma – at nine months old, and not even 10kg, I didn’t want to even consider a Group 1 carseat; He was far too young for that. However, I also knew that any other Group 0+ carseat would suffer the same problem as we’d found with the CabrioFix – it simply wouldn’t be long enough to accommodate him safely. I did some research and discovered that Maxi Cosi had launched a combination carseat Group 0+ and Group 1 called the Opal (Review Here). This meant the seat was suitable to use from newborn right up until the child reached a maximum weight of 18kg and required a Group 2/3 High Back Booster seat instead of a carseat with an integral harness. The combination of groups meant that the Opal answered my needs; the seat was designed to be suitable for a child of up to 18kg, which is around three and a half years old, so it is a fair size seat, chunky and tall so the child can easily see out the windows. As it is also designed to be used from newborn, though, you have an adjuster on the front of the seat, allowing you to widen and narrow the wings down the sides of the seat, enabling you to ensure the seat fits snugly against your child for optimum protection. The Opal can be used as a rear facing carseat from birth to maximum weight of 13kg, and then used as a forward facing carseat from 13 to 18kg. This combination of the size of seat and the crossover of Group allowed me to keep The Boy rear facing in the Opal until he reached 13kg – which considering he was too long for the CabrioFix by nine months old I am very proud to say he continued to travel in the car rear facing until he reached eighteen months old.

I am a fan of ERF, by the way – I think it’s far safer to keep children rear facing for as long as possible. Unfortunately my car is not suitable for a standard Group 1 ERF seat – I have had every one physically fitted (by members of staff and by myself, as I am carseat fitter trained) and not one ERF seat is suitable for use in my car that is currently available for sale in the UK. I kept The Boy rear facing for as long as I possibly could in my car, and I’m proud of how old he was before we made the switch to forward facing.

You have to remove the Opal carseat and change it from rear to forward facing and re-fit it, so it seemed like a bit of a momentous moment when it happened. The Hubby took advantage of our removing the carseat and cleaned the car inside and out. He commented about the marks on the rear seat and the seatbelt from the carseats, but it isn’t something that concerns me; I would rather ensure my child is as safe as possible in a carseat fitted as tightly as it can be with a three point seatbelt than worry about marks being left. A car is a car and my child’s life is far more important! Anyway once he’d cleaned it and hovered it all the marks on the seat were hardly visible. I took the opportunity to wash the carseat fabrics and was again amazed at how well they come out of the machine (handwash cycle, 30 degrees, Fairy Non Bio, they’re the Intense Red colour and they come out as good as new) the fabrics dry really quickly too – they remain in a carseat shape which is odd, so I stand them up on an airer in front of a radiator and within a couple of hours they’re good to go again. I left them overnight to ensure they were properly dry, then put them back on the seat. I set up the seat in the forward facing option and went out to the car.

As I hadn’t fitted the seat forward facing since my training I thought it would be awkward to do but it’s very easy and bearing in mind how fussy I am it was so quick to fit the first time I did it that I couldn’t believe I’d done it properly, so I took it all out and started over again! I still love how you can hide the seatbelt under the fabric popper section on the back and it feels good and sturdy when it’s in place properly.

Now forward facing, there are recline options available. As I know it’s safer for The Boy to be as reclined as possible in the event of an impact now he’s sitting facing forwards to protect his neck and back as much as possible, I have kept the seat in the furthest reclined position – it doesn’t look that reclined, until you sit it upright and you realise it is quite reclined. The Boy looks chilled out, laid back and relaxed in this position. I did notice though that despite it being reclined, when he falls asleep his head does roll forward and he ends up with his chin on his chest. I know he’d wake up if he was immediately in pain or having difficulties breathing, but my concern is if we go on a long journey and he sleeps like that for a long time, it’ll be sore when he wakes up and that’s not going to be fun, so I have brought him a Safety 1st Nap & Go carseat pillow which was recommended by a friend.

In addition to this, I find it much more difficult to get him in and out of the seat now it is forward facing. It’s too high to allow him to climb in himself – he simply can’t reach that far – but at the same time the ‘wings’ at the side are very deep, and that makes it very difficult to get him in now because you have to try and reach around the wings and slot him into the seat. Maybe it’s because I still use it on the narrowest setting, as he is so tall and slender, and if it was on a wider setting this could be less of a problem as the wings wouldn’t be so upright. Between the height of the door opening on my car, the plastic hanging/grip bar above the door and the angle I have to try and get him into the carseat it’s a bit awkward. There's also the fact that now he is forward facing he slides down the fabric slightly as we're getting him in, which leads to the fabric rucking around his lower lumbar region, which he fusses with and moans about unless you deal with it right away, which is a pain!

On the up-side, now forward facing it is much easier to get the harness properly tightened up first try. I don’t know whether it was just the wrong angle when rear facing, but it seemed to stick every now and then and would take two or three goes to get it properly tensioned and tight enough. Now I do it once, it slides through smoothly and it’s properly tensioned and we’re ready to go.

I still wouldn’t recommend this seat for someone to use with a newborn baby simply for how awkward it would be to get a newborn baby into any seat already fixed into the car – that’s the whole point of infant carrier carseats! I loved this carseat for keeping The Boy rear facing from nine to eighteen months old, but I must admit now we’re using it forward facing I am loosing a little bit of love for it.

A good friend of mine has the Axiss and absolutely loves it; my sister in law has already purchased an Axiss for when her son requires a Group 1 carseat; I was in Sainsburys supermarket the other day and the lady parked in the parent and child bay directly in front of me came out of the store, popped her toddler son into the Axiss and had him ready to go in no time. It’s a brilliant idea, because it must be so much easier to get them into a seat facing you directly than trying to slot them in at a sideways angle; having them facing you to get them into the seat also means you can be confident the harness is done properly as you haven’t got to feel around the side that you can’t see like you do with a regular carseat at a sideways angle to how you’re standing beside the car. I really like the Axiss, but I’m determined to see whether I can overcome my problems with the Opal first, as I really do like the look of this carseat and the quality feel of it. It’s a chunky seat, heavyweight and it sits firmly in position, whereas the Axiss appears taller and slimmer (though potentially that would make it more suitable for The Boy). I will continue with the Opal for now, but I am already thinking of donating it to my mother in law as it’s a combination seat it would be useful for her as it would mean she can use for The Boy as well as The Nephew, and the number of times she is likely to use it means that it doesn’t have to be the easiest or quickest thing in the world to do because it would also be one of the rarest!

On the whole I think the Opal covers a very good market – I would have had to put The Boy in a Group 1 carseat at just nine months old without a crossover Group 0+ and Group 1 carseat like this to fill the gap. However, as a forward facing carseat I don’t feel it meets the standards set by the others available. It was brilliant to be able to keep The Boy rear facing for as long as I did, but I don’t think my Opal love affair will continue as long as it should. This carseat is suitable until The Boy reaches 18kg (approx 3.5yrs old) I’m not convinced I can live with it for that long!




Product Review - Maxi Cosi FamilyFix base, Pebble (Group 0+) and Pearl (Group 1)



Both my parents have newer cars than I do. They both have IsoFix points, three point seatbelts in the centre seat, top anchor tethers and approval pretty much across the board for any type of IsoFix fitted carseat to be used in any of the three rear seats – and that’s in both their cars.

When I discovered I was pregnant, their idea was simple – to purchase a good quality carseat system suitable to use in either car and made to last for a long time. It’s reasonable to expect that another child may join the family within the recommended five year life expectancy of the carseat so they wanted something that would be useable as long as it was looked after.

After checking both their vehicles on the website and confirming suitability with a physical fitting from a trained member of staff, they purchased the Maxi Cosi FamilyFix base along with a Pebble and Pearl carseat in Jet Black. The Mother was won over by how comfortable and cosy the carseats looked, she saw a baby in the store in a Pebble when they went to buy it and she melted at how the baby looked all snug and safe and that was it for her.  The Father was impressed by the pretty lights and chirpy sounds.

The FamilyFix base is fitted with IsoFix points only – unlike its predecessor, the EasyFix (which can be fitted with IsoFix points or the three point seatbelt). The first green light comes on and the ‘yes’ beep sounds when you connect the base to the IsoFix points and they are both correctly connected. The second is once the support leg has been adjusted and is in the correct position, and the third is when the seat is placed onto the base and locked in successfully.

The FamilyFix base can be used with the Maxi Cosi CabrioFix or Maxi Cosi Pebble (both Group 0+ carseats, from birth to 13kg) and the same base can be used with the Maxi Cosi Pebble carseat (Group 1, from 9-18kg) While both the CabrioFix and the Pebble can also be fitted without a base, using the three point seatbelt in a vehicle, the Pearl can only be fitted with the FamilyFix base.

When The Boy was little we went out a few times in either of my parents cars, and to be honest I normally used our own CabrioFix in the FamilyFix base instead of using their Pebble. This was only for the fact that the CabrioFix was in our house, so we’d put him in the carseat to get him out to the car and then lock the carseat into the base. The times we did use the Pebble, it proved a very good little carseat.

The Pebble is an updated version of the CabrioFix – you can see the similarities in the styles, but instead of the CabrioFix headhugger which is an upside down U shape which is also attached to the lumbar support cushion fabric, the Pebble headhugger reminds me of a polo mint. Much more easily adjustable and capable of hugging much smaller heads than the CabrioFix, the headhugger contrasts with the colour of the Pebble harness pads and carseat fabrics for a modern, contrasting style. The Pebble harness is a ‘easy out’ harness, which means that it is spring loaded at the shoulders so when you click that red button to release the harness it opens up and effectively out of your way. This helps to stop the baby from getting their arms caught in the harness, which I didn’t find a problem with The Boy in the CabrioFix when he was very young but as he got older and started flapping more when he was excited about arriving somewhere, then I understood the appeal of a harness that got out of your way! The Pebble is also very easy to adjust the harness height – you unlock the headrest by depressing the button on the back, and you can move the headrest up and down, so adjusting the harness height in one easy movement. This makes it very easy to ensure the harness is no more than an inch above or below the height of the child's shoulders (where a correctly adjusted harness should be).  When used with the FamilyFix base, it can gradually sit more upright, providing an extended lifestyle of the carseat by continuing to provide ample leg room as baby gets older, enabling you to keep baby rear facing for longer (max weight 13kg in this particular carseat – my son didn’t reach 13kg til he was 19 months old) Like the CabrioFix, the Pebble can be fitted onto most Maxi Cosi or Quinny chassis to form a travel system. (Check the specification of the particular chassis you have for confirmation)

The only Group 1 carseat currently suitable for use with the FamilyFix base is the Maxi Cosi Pearl. The Pearl can only be fitted with the FamilyFix base, so if you have a car without IsoFix that is regularly used for transporting your child, this option is not for you, as you would need an entirely different carseat fitted with the three point seatbelt, which the Pearl does not have the option of doing. The Pearl is a forward facing Group 1 carseat, suitable from 9-18kg. The Boy first used the Pearl when he was a year old, because at that point he was too long for the Pebble (even making use of the FamilyFix recline positions) and I didn’t want the fuss of moving my Opal from my car into my dads when he had the FamilyFix base and Pearl ready and waiting. I was nervous at The Boys first forward facing journey, but I kept him reclined and he was excited about the different view.

Again, the Pearl offers a modern appearance and has the same ‘easy out’ harness and can be purchased in a range of colours to match the Pebble, so if you have two children of different ages they can use matching colour carseats. My parents went for the Jet Black as it was gender neutral, and went well with the interiors of both cars (one featuring black leather, one with the standard Vauxhall grey) but there is a wide range of colours available in the Pebble and Pearl range, though the collection colours do vary year to year so there is no guarantee that the colour you choose now will still be available next year. The Pearl with FamilyFix base offers a range of recline positions and the same easy way of adjusting the harness height as the Pebble.

I find the whole system very easy to use and customer friendly – it gives a visual as well as audible indication that fitting is correct which provides plenty of confidence. The only thing I do find is that when going around corners in my dads car the support leg indicator goes off and on again as it struggles to keep a footing – but I think this says more about my dads driving than it does about the base. The harnesses on the Pebble and the Pearl are very smooth running and easy to tighten correctly, though my mum still needs additional encouragement to do it up properly (Remember, if you can fit more than one finger between the child’s chest and the harness then it is too loose!) The times we have used either carseat, The Boy has always been comfortable and secure, and I am pleased with this system on the whole.

Verdict: Though expensive, worth the extra money if you can afford it for ease of use and for the fact that you can be confident you’ve fitted the seat properly. However if, like me, you’ve got an older model car without IsoFix points this system isn’t for you.




Maxi Cosi Mura - The Sun Canopy Saga!



Regular readers will know how much I love my Maxi Cosi Mura. I have a 2010 Tango Red model which has done many miles off road travelling down muddy pathways, through dense forests, as well as trekking round the shops and negotiating small spaces with ease that is at odds with the sheer size of it. I used it with the Mura carrycot when The Boy was first born, then when he was six months old I packed up the carrycot and he started using the seat unit. The footmuff was brilliant from the time he was six months old right up until he was seventeen months old (and he’s tall) so it is a worthwhile investment if you’re going to be using the pushchair a lot in colder weather – we do a lot of walking regardless of the weather, so it was important to me that the pushchair I chose was going to be good in all weather, which brings me onto the issue I have right now with my beloved Mura.

It has a lovely big sun canopy, and a third panel which counts as the additional sun visor brings the canopy on the Mura right over the top of the child to the point where they can’t see directly ahead if they’re sitting upright. I find the additional sun visor helpful when The Boy is asleep, as it means I can completely shade him over and he sleeps well, but the problem with the sun visor is that because it blocks his view, if he’s awake, The Boy fiddles with it, and pushes it back out of the way. The sun canopy itself is clipped into place on either side of the Mura seat unit with two plastic brackets, and just above each bracket is a curve of plastic coming out of the Mura sun canopy fabric. On the 2010 model Mura, you have to ‘open’ both these locking mechanisms by pushing them out, away from the seat unit, and at the same time bring the sun canopy forward, because as soon as you let go of either latch it reverts into the ‘locked’ position. It’s a tricky process and there’s definitely a knack to doing it! But when the seat unit was in the parent facing position, it was just a little niggle and not something major.

One day The Hubby took The Boy out while I was at work, and when I returned that evening he said to me he’d had some trouble with the hood of the pushchair. The lock on one side of the sun canopy had got stuck, the canopy open, when they were out and he was trying to fold the canopy back to the closed position so that he could get The Boy out of the pushchair. He’d fiddled for ages with it trying to get it to work, until finally it popped off the side of the seat unit. He tried to get it back on, and couldn’t – upon closer inspection we found the bracket had bent out of shape, so it no longer would clamp into position where it should. It was also still in the locked out position on one side, and wouldn’t unlock.

Fortunately for us, we were still under warranty (12 month fabric warranty) at this point so a replacement was ordered. In the meantime, I did manage to bend the bracket back into a make-do that worked while we waited. When the replacement arrived, I checked it over and it was all OK, but as I’d managed to get the original back to something that did the job I decided not to put the replacement on immediately. After all, if it had happened once it could happen again!

Three months later, it happened again, and the original sun canopy popped off the seat unit again, the bracket once more bent out of shape. This time both sides got stuck, and both brackets were damaged, so we threw that sun canopy and put the replacement one on.

I had The Boy in the Mura parent facing up until very recently, because when we go walking I can get caught up in my surroundings and forget that someone else is there with me if I’m not looking at him, and I was conscious that if he was world facing it would be harder for him to hear me, he couldn’t see my facial expressions and be able to communicate back, and I wouldn’t be able to see if he fell asleep (or was ready to). Eventually I had to bite the bullet, as the footrest on the Mura is fixed to the chassis at the front, rather than being attached to the seat unit like it is for many other models. As The Boy got older, he had nowhere to rest his feet, so he’d hook them up and over the chassis handlebar sides or else he’d put them on the back wheels, causing us to come to a very abrupt standstill! I put the seat world facing a while ago and he seems happy with it – he hasn’t fallen asleep world facing yet, though he was becoming less likely to fall asleep while in the pushchair anyway – he’s just too nosy right now!

The immediate problem I found was that as soon as the seat was world facing, the locking mechanism to open and close the sun canopy was in line with the chassis handlebar sides. It was physically impossible for me to fit my hands in the gap, unlock the sun canopy mechanism and open or close it. Instead, I have to recline the seat back, to ‘reveal’ the locking mechanism, sort out the sun canopy and then put the seat back into the position The Boy wants to be in – normally as upright as possible! But because of how low the sun canopy comes, and the fact that it locks in position, you can’t do that and then get The Boy into the seat – you have to get him in the seat first – so then you recline it back and he’s fussing and flapping and worrying that you’re going to try and walk around with him lying back, which he really isn’t keen on doing anymore. Then once you’ve fussed with the hood and you put the seat unit back up again, you realise that the top of the hood is actually resting on The Boy’s head.

He is a tall child for his age – he’s around 88cm I think, but he won’t stand still long enough at the moment for anyone to check, I’m going by clothes sizes! However, he is still only nineteen months old, and the Mura is advertised as suitable for up to around three and a half years old (15kg) 

We went out yesterday on a fantastic walk – we left the house by noon and we walked for four hours in gorgeous sunshine (both of us coated in sun cream, him with hat, both of us with sunglasses and the sun canopy was up/out on the pushchair. We had a marvellous time and when we got home, I went to close the sun canopy and found the left side locking mechanism was sticking. I reclined the seat to access it, causing The Boy to become quite annoyed and start to flap around, but despite my efforts I couldn’t unlock it properly on the left side and it eventually popped the bracket off the seat unit fixing. Both brackets were bent out of shape, and there was no way of getting it back onto the seat unit as damaged as it was.

Fortunately for me, loads of other people have encountered this problem with the 2010 model as well, so a new design was brought out in 2011, then a further new design for 2012. I now have a 2012 style sun canopy which fits onto the rounded part of the seat unit (near the top) with plastic clamps, the fabric is ‘pinned down’ the side using elastic loops. It has a much better mechanism where you don’t have to mess about unlocking things to move the sun canopy, it’s just a standard push and pull to open and shut style sun canopy! As this design sits higher on the seat unit, it provides The Boy with much more head room so once again the Mura looks like it will be able to contain The Boy for much longer yet (it was starting to look silly because his head touched the inside of the old sun canopy). The section at the back now has a plastic catch to hook it in place and hold it there so you can’t over-pull the sun canopy and have it pop off the back of the seat unit, like it used to with the old one. It’s made such a difference to me, as silly as it sounds, because I no longer have to fuss about opening and closing the sun canopy every time we go in and out of shops, its much easier to live with than the old one and I’m happy that The Boy is more comfortable too because he has that extra bit of head room! It hasn’t compromised coverage at all, though I do find that if you recline the seat the hood stops protecting much, so I would definitely recommend a parasol for naps on sunny days, or a carrycot attachment for younger babies to keep them cool and shaded.

If you have a 2010 Maxi Cosi Mura and your sun canopy is broken due to the lock/unlock gets stuck and the brackets bend, I recommend you return to your retailer with proof of purchase and the damaged sun canopy so they can contact Maxi Cosi for a replacement sun canopy. I couldn’t get the 2012 style in Tango Red (the colour of my Mura) but I got it in Total Black instead and it looks fine (the Intense Red colour is too bright against the Tango Red seat fabric) My situation was resolved promptly and without fuss, and The Boy and I are thrilled to be able to report that we went for a lovely long walk this morning and thoroughly tested the sun canopy and found it performed very well!




Sunday, October 9, 2011

Update On Footmuffs!



As I said in a previous post, I wasn’t impressed with the size of the footmuff on the Maxi Cosi Mila pushchair. I did notice though that when looking at the Maxi Cosi website, they advertise the footmuff that used to come with the Mura as the ‘Maxi Cosi’ footmuff in general, and it will fit onto any of their brand pushchairs now.

Well, when I first got the Mura footmuff, I couldn’t find one anywhere in Tango Red – to match the Mura. Instead, I originally got a Grey Slice colour – this is an ‘old’ colour so it was cheaper too. The Grey Slice footmuff is the same style footmuff but was produced then specifically for the Grey Slice Mura, and the footmuff has the grey fleecy lining and the outer is black ‘shellsuit’ type fabric, more like a waterproof jacket than the heavier, more canvas feel of the Tango Red footmuff.

Anyway, I used it once on the Mura and it was great and everything but then as luck would have it I happened to find a Tango Red one, and got that. Originally I was going to save the Grey Slice one as a ‘standby’ in case the Tango Red was ever in the wash when I needed it, but then having realised that the size of the Mila footmuff was quite small, I decided to take the Grey Slice footmuff to my mother in laws house for her to use on the Mila, as it fits.

I demonstrated to her how to fit it – as she is an ‘easily confused’ type of person, as I think we’ve established with the whole can’t-fold-the-Zapp-chassis stories, however she was quite happy as I showed her that it wasn’t too bad although it was a bit of a fuss. I said that it was, and you couldn’t leave it in place if it wasn’t needed as there’s no real way of keeping it out of the way if it’s on the pushchair but not in use (unlike the Quinny footmuff, which the back remains in the seat without the front, to provide a seat liner) However as we are now in October I think she’ll be needing the footmuff on more often than off, so we shall see how it goes. Once it was in place and I harnessed in The Boy so she could see from start to finish how to do it, The Boy was then all geared up thinking we were going out somewhere, so he took a walk around in the garden with my father in law to keep him entertained for about fifteen minutes. Back indoors, I walked off and allowed parents in law to remove The Boy from the footmuff and the Mila, which they achieved relatively quickly although there were complaints about how much fussing about it was. Mother in law then started waxing lyrical about old-fashioned pram suits, like the sort The Boy had when he was really tiny, so you put the baby in that and into the pushchair rather than struggling to get a footmuff that’s more like a body bag into place before putting the child into it, but I said to her I hadn’t seen one I could afford in his size and that seemed to persuade her to stop worrying about what I hadn’t got and appreciate what I had! (After all, this is RRP £50 and once again she’s not paid me for it!)

Anyway it was a real success, so I thought I’d share my story that I can confirm the two-legged Maxi Cosi footmuff can be fitted well onto the Mila and does a fab job while it’s there – The Boy was content and warm and cosy as we stood in the autumnal wind watching his parade laps of the garden in his pushchair!

Monday, July 4, 2011

Product Review: The Maxi Cosi Opal (Group 0+ and Group 1)



What? The Maxi Cosi Opal carseat (Group 0+ and Group 1)
How Much? RRP £220
Where? Available from all authorised Maxi Cosi Retailers


The Boy is particularly tall for his age. Despite his height, he isn't a very heavy lad; At 10 months old he weighs in at 22lb and is 77cm tall. As he is still below the 28lb maximum limit for him to be in a rear-facing Group 0+ carseat, I am keen to keep him rear-facing, as we all know it's better for children in the event of an impact, due to their delicate neck and spinal muscles.

I used the Maxi Cosi CabrioFix carseat from the time The Boy was born until he was nine months old. At that point, he became too tall to safely continue using the CabrioFix - his head extended out the top of the seat and the harness was more than 1cm below the height of his shoulders at the maximum setting. This is the guideline; this means the child is now too tall to use the carseat.

As I didn't want him going forward facing just yet, the Opal was my first choice, as it is a combination seat. It is the only combination Group 0+ - Group 1 seat that is offered under the Maxi Cosi brand name, and I was dubious at first whether it could be truly successful. How can a carseat be suitable for a tiny newborn infant and still be comfortable until that child is about 3.5 years old?

The Maxi Cosi Opal is a chunky beast, but it feels solid and well padded. There's a lumbar support cushion for tiny babies, but we didn't need to use this due to The Boys age when we first got the seat. The headrest and harness adjustment is similar to the Maxi Cosi Tobi, Pebble and Pearl design; where you move the headrest up or down to adjust the shoulder height of the harness straps. Unlike the Tobi, Pebble and Pearl, the Opal carseat harness is not spring loaded, so it doesn't open out automatically, but there are handy hooks either side of the seat to get the harness out of the way. There's a large grey knob on the front of the seat which you turn to open out the carseat - this really is brilliant - you can have it very narrow for a younger child, and gradually open out the width of the seat to suit an older child. It isn't just the sides of the seat part that open out either, the whole side impact system opens outwards with an easy twist of the knob so you know your precious cargo is going to be as comfortable as possible, and as safe as can be.

As I've said before, I only have a little car, and for the moment the Maxi Cosi Opal is fitted rear facing as The Boy is below the maximum weight of 28lbs for travelling rear facing and using the seat in the Group 0+ state. There is a handy indicator at the side of the seat, printed on the fabric of the seat that you expose as you move the headrest up to adjust the harness, and it tells you that if your child is below a certain height you should use the seat rear facing - and there is a 'grey area' in the middle to show you could use rear facing or forward facing, depending on weight of the child - and a final area at the top, to indicate that by the time the child is this age you need to be using the seat forward facing. The Boy is about three quarters of the way up the 'grey area' and as I am confident of his weight I am keeping him rear facing. However, in my little car, this is easier said than done.

To begin with, The Hubby had to have the front passenger seat quite far forward to accommodate the EasyBase 2 when we used that with the CabrioFix, and I wasn't anticipating the Opal being any bigger than that was; But it is, so the front passenger seat is now pretty much as far forward as it can be. It means my 6ft 1ins Hubby sits with his knees up his nostrils, and on a long journey (like the 100 mile trip on Saturday) this became very uncomfortable for him and he complained of back and hip pain after a couple of hours in the car. Also, when the seat is rear facing, the seatbelt has a long way to go round, and we discovered upon fitting the seat in my car that it uses up every last centimetre of available seatbelt in my car - making a physical fitting doubly important, as I expect a lot of cars will fall short on seatbelt length!


Fitting the Opal into my little car took the pair of us about 10 minutes to do successfully, and this was after I'd had a 30 minute demo and play with the seat from one of the wonderful Maxi Cosi carseat fitter trainers, so it is fairly straightforward to do, but the difference between doing it on a training rig and doing it in a car is huge! In the car I kept bumping my head on the doorframe as I got the seat into the right position, and getting the horizontal part of the seatbelt in the correct position in the car was much more difficult than it was on the training rig! But once we'd got it and put on the three tensioners (I remember that by saying the seat is Once, twice, three times a lady!) the seat is then very secure and you know it isn't going anywhere! I will be shocked if I don't have marks on my vehicle seats after using this carseat, some people moan about that but I am happy because it means my carseat has been well installed!!

The problem I find with this is that it leaves part of the seatbelt coming out from the shoulder part of the carseat and going across the doorway so getting baby in and out is a bit tricky as you have to try and post them through the gap between the top of the door opening and where the seatbelt is when you're using it rear facing. With The Boy this isn't so bad, as he is old enough to think its fun when I hold him and say "Whoosh" ready to post him in through the gap, but for a young baby I think this could be problematic especially when they don't have much neck/head control it will be awkward. When you then go to take baby out of the carseat again you have to be careful to get them out of a narrow gap but this time you have the added concern of the corner of the car door - a couple of times I have been so concerned about getting The Boy out of the space that I have inadvertently bumped his head on the car door, causing lots of tears and noise, so again that’s something to watch out for. And again, I would think with a younger baby this would be even more difficult as they can't 'help' you as much as an older baby can with getting in and out.


Once The Boy is in his seat though, it offers him plenty of space, and we have it on the narrowest setting at the moment as he is quite slim. The harness pads on his shoulders are rubber backed, so when you put them on the child they stay put (not like some which can slip and make escaping easy!) This also helps ensure the harness is positioned correctly when you tighten it up. There is an easy tensioner strap in the centre of the seat just under the crotch strap of the harness and you feel confident when you tighten the harness that it is secure and your little one won't be getting out without your say-so. The harness release is the standardised red button on the centre of the harness, with the lengthening of the straps being done by a small metal catch, hidden under a plastic bump which makes it difficult for the child to get into but easy for you. Having said that, I have noticed a few times when I'm loosening the harness before getting The Boy out, his little fingers creep around to feel what I'm doing, so it is something I'm conscious of and I do have the Maxi Cosi PlayTray which fits onto the product and will prevent him getting to the release button and the lengthening catch.


Every time I have used this carseat so far The Boy has fallen asleep, even on very short journeys, which tells me he is comfy in it. We have the Intense Red colour which is a lovely vivid pillar box red colour with the Maxi Cosi circle pattern stitched on one side of the seat, the fabric feels quite soft and cottony even though its a man-made fabric and one thing I have noticed is even though The Boy fits nicely into the seat he doesn't get half as hot in it as he used to with the CabrioFix (before we used the summer cover). This is just as well, as unfortunately Maxi Cosi has decided not to offer the Opal summer cover for sale in the UK, which I was hugely disappointed with. I am considering importing one over from Germany but for the time being I am happy to use it without as The Boy has been very comfortable in it, even the other day when we were stuck in sun for an hour in a traffic jam on the motorway!

When the time comes for The Boy to go forward facing, the Opal will need to be completely removed from the car in order to be twisted to the forward facing position and then re-installed, which is a bit of messing about but then it isn't something you'll be doing frequently so it isn't so much of a big deal – and for the added benefit of him staying rear-facing for longer and being as safe as possible it isn’t something that concerns me! I would mess about much more if it meant he remained as safe as possible on car journeys.

I've only used this carseat rear facing so far, so this may be amended at a later date, but so far I'd give the Maxi Cosi Opal carseat a solid 4 out of 5 - my only issue is the seatbelt getting in the way when you're using it rear facing!